- New
Same-day dispatch · Delivery 3–5 days · 44 countries across Europe
Same-day dispatch · Delivery 3–5 days · 44 countries across Europe
Holographic Anthracite Polyester Powder - Holo Grey
€29.90
Tax Included
Rating:
(0)
Anthracite grey with polychromatic holographic effect. Red, green, blue reflections shifting with light. Subtle indoors, spectacular under sunlight. TGIC-free polyester, high-gloss high-durability finish, Qualicoat class 1 compliant.
Perfect for wheels, motorcycle parts, custom and restoration projects. Available in 0.5 kg or 1 kg, ready to spray.
Security policy(edit with the Customer Reassurance module)
Delivery policy(edit with the Customer Reassurance module)
Product returns (distance selling) within 14 days, Return shipping at customer’s expense. Opened/used products: reduced refund or refusal if depreciated.
A special-effect powder that delivers
Looking for a finish that turns heads without screaming for attention? The Shark Powder Coatings Holographic Anthracite Powder nails both. A deep anthracite base, close to RAL 7016, with a high-intensity holographic pigment throwing red, green, blue and gold reflections depending on angle and light. Stays clean and elegant indoors. Lights up under direct sun.
Built for wheels, fuel tanks, motorcycle parts and custom projects where finish makes the difference.
Available in two pack sizes to match your project: 0.5 kg for a color test or small job, 1 kg for a wheel, medium part or several small parts.
The numbers that matter
Chemical base: TGIC-free polyester
🎨 Base color: Anthracite grey (close to RAL 7016)
✨ Effect: Polychromatic holographic
Finish: Gloss (80 to 90 units at 60°)
Density: 1.2 to 1.9 g/cm³
Particle size: Suitable for electrostatic spraying
Recommended thickness: 60 to 80 microns
🌡️ Cure (object temperature): 15 to 20 min at 180 °C
✓ Compliance: Qualicoat class 1, GSB, EN 12206, EN 13438, AAMA 2603
Storage: Dry, cool, below 30 °C
📦 Pack sizes: 0.5 kg or 1 kg
Cure: 180 °C max, no pushing it
The temperature shown is the part temperature once heated through, not the oven temperature. Cure 15 to 20 minutes at 180 °C.
⚠️ Important. Do not exceed 180 °C in prolonged cure. The holographic pigment can degrade above that and lose part of its polychromatic reflections. If you usually run 200 °C, drop down for this one.
Application notes: this is a special effect, not a standard powder
- First-pass application only. Do not blend with reclaimed powder: recycling mottles the effect and kills the depth.
- Surface preparation is mandatory. Blasting or chemical degreasing matched to substrate (steel, aluminium, cast iron). For prolonged outdoor use, anti-corrosion primer strongly recommended.
- Clear coat over: recommended. Deepens the effect and protects the holographic flakes against abrasion. Clear coat cure: 180 °C max too.
- Corona or tribo electrostatic gun, like any standard powder. Soft settings to keep the effect intact.
Where it shines
Particularly stunning on curved surfaces that play with light:
- Tuning car wheels, motorcycle and motocross wheels
- Fuel tanks, fenders, fairings
- Engine parts, 50cc custom parts
- Helmets, decorative items, premium DIY projects
Safety
Professional or skilled DIY use. Recommended PPE during application: gloves, goggles, P2 dust mask. Keep away from ignition sources. Store in closed, dry, cool container. Safety data sheet available upon request.
4 Items
Specific References
You might also like
Anthracite grey with polychromatic holographic effect. Red, green, blue reflections shifting with light. Subtle indoors, spectacular under sunlight. TGIC-free polyester, high-gloss high-durability finish, Qualicoat class 1 compliant.
Perfect for wheels, motorcycle parts, custom and restoration projects. Available in 0.5 kg or 1 kg, ready to spray.
Holographic Anthracite Polyester Powder - Holo Grey
€29.90
Tax Included
Delivery between 3 and 5 working days